China Suppliers 1000-6000W Pure Sine Wave 48 Volt Dc To Ac Power Inverter
Key Features:
1.Pure sine wave output
2.The charging current is big up to 85 Amp
3.Output power factor:s 0.9-1
4.Well accept generator's output
5.Full automatical and silent operation
6.Automatically transfer between battery and line modes
7.Microprocessor control guarantees high reliability
8.Remote control function
9.Three-steps intelligent charging control to recharging time
10.Bypass and bypass voltage regulation function
11.Could be setting frequency by LCD display with color screen
12.Battery type and charge current can be select
Full protection:
Protection for low battery voltage,over load,output short circuitand over- temperature Restrain surge interference,eliminate noise,protection for thunder striking,provide the reliable power to the home appliances. Supply the reliable long back up time power for the home appliances and office appliances Solar power systems etc.
Applications:
Supply the reliable long back up time power for the home appliances and office appliances Solar power systems etc.
Technical Specification:
| MODEL |
IG3115CS 1-12KW Pure Sine wave Output Inverter |
| 1KW |
1.5KW |
2KW |
3KW |
4KW |
5KW |
6KW |
8KW |
10KW |
12KW |
| Input Wave form |
Sine wave (utility or generator) |
| Nominal Voltage |
230Vac (120Vac optional) |
| Low voltage trip |
90v ±4% & 184v/154v ±4% |
| Low voltage re engage |
100v ±4% & 194v/164v±4% |
| High voltage trip |
140v ±4% & 253v ±4% |
| High voltage re engage |
135v ±4% & 243v±4% |
| Nominal Input Frequency |
50Hz/ 60Hz (auto detection) |
| Frequency range |
47Hz~65Hz |
| Output Wave form |
(Bypass mode)same as input |
| Efficiency on line transfer mode |
≥95%+ |
| Line transfer time |
10ms Typical |
| Bypass without battery connected |
Yes |
| Inverter specification/output |
| Output wave form |
Pure sine wave |
| Output continuos power watts |
1000 |
1500 |
2000 |
3000 |
4000 |
5000 |
6000 |
8000 |
10000 |
12000 |
| Output continuos power VA |
1000 |
1500 |
2000 |
3000 |
4000 |
5000 |
6000 |
8000 |
10000 |
12000 |
| Power factor |
0.9-1.0 |
| Nominal Output Voltage rms |
230Vac (120Vac optional) |
| Output Voltage regulation |
+/- 10%rms |
| Output frequency |
50Hz ± 0.3Hz or 60Hz ± 0.3Hz |
| Safety Certification |
>88% |
| Surge ratings |
3000 |
4500 |
6000 |
9000 |
12000 |
15000 |
18000 |
24000 |
30000 |
36000 |
| Short circuit protection |
Yes,fault after 1 secs |
| Inverter specification/input |
| Nominal input voltage |
12V/24V/48V |
48V/96V |
| Minimum start voltage |
10V/20V/40V |
80V |
| Low battery alarm |
10.5V/21V/42V |
84V |
| Low battery trip |
10V/20V/40V |
80V |
| High voltage alarm |
16V/32V/64V |
128V |
| Power saver |
Same switched on/off on remote |
| Charger mode specification |
| Output voltage |
Dependent on battery type |
| Charge current |
0-85A MAX |
70/35A |
85/45A |
100/50A |
| Battery initial voltage for start up |
0-15.7v for 12v(*2 for 24v;*4 for 48v;*8 for 96v) |
| Over charge protection shutdown |
15.7v for 12v(*2 for 24v;*4 for 48v;*8 for 96v) |
| Charger curves(4stage constant curren) |
battery types |
| 4 step digital controlled progressive charge |
| Battery type |
Fast V Fast V(*2 for 24v;*4 for 48v) |
| Gel U.S.A |
14 13.7 |
| A.G.M. 1 |
14.1 13.4 |
| A.G.M. 2 |
14.6 13.7 |
| Sealed lead acid |
14.4 13.6 |
| Gel euro |
14.4 13.8 |
| Open lead acid |
14.8 13.3 |
| Calcium |
15.1 13.6 |
| De-sulphation |
15.5 for 4 hrs |
| Remote control/RS232/USB |
Yes. Optional |
Audited Supplier 
){kind=link}
){kind=link}