Customization: | Available |
---|---|
Nature of Source Flow: | Active Inverter |
Certification: | CE |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
MODEL | IG3115CS 1-12KW Pure Sine wave Output Inverter | |||||||||
1KW | 1.5KW | 2KW | 3KW | 4KW | 5KW | 6KW | 8KW | 10KW | 12KW | |
Input Wave form | Sine wave (utility or generator) | |||||||||
Nominal Voltage | 230Vac (120Vac optional) | |||||||||
Low voltage trip | 90v ±4% & 184v/154v ±4% | |||||||||
Low voltage re engage | 100v ±4% & 194v/164v±4% | |||||||||
High voltage trip | 140v ±4% & 253v ±4% | |||||||||
High voltage re engage | 135v ±4% & 243v±4% | |||||||||
Nominal Input Frequency | 50Hz/ 60Hz (auto detection) | |||||||||
Frequency range | 47Hz~65Hz | |||||||||
Output Wave form | (Bypass mode)same as input | |||||||||
Efficiency on line transfer mode | ≥95%+ | |||||||||
Line transfer time | 10ms Typical | |||||||||
Bypass without battery connected | Yes | |||||||||
Inverter specification/output | ||||||||||
Output wave form | Pure sine wave | |||||||||
Output continuos power watts | 1000 | 1500 | 2000 | 3000 | 4000 | 5000 | 6000 | 8000 | 10000 | 12000 |
Output continuos power VA | 1000 | 1500 | 2000 | 3000 | 4000 | 5000 | 6000 | 8000 | 10000 | 12000 |
Power factor | 0.9-1.0 | |||||||||
Nominal Output Voltage rms | 230Vac (120Vac optional) | |||||||||
Output Voltage regulation | +/- 10%rms | |||||||||
Output frequency | 50Hz ± 0.3Hz or 60Hz ± 0.3Hz | |||||||||
Safety Certification | >88% | |||||||||
Surge ratings | 3000 | 4500 | 6000 | 9000 | 12000 | 15000 | 18000 | 24000 | 30000 | 36000 |
Short circuit protection | Yes,fault after 1 secs | |||||||||
Inverter specification/input | ||||||||||
Nominal input voltage | 12V/24V/48V | 96V | ||||||||
Minimum start voltage | 10V/20V/40V | 80V | ||||||||
Low battery alarm | 10.5V/21V/42V | 84V | ||||||||
Low battery trip | 10V/20V/40V | 80V | ||||||||
High voltage alarm | 16V/32V/64V | 128V | ||||||||
Power saver | Same switched on/off on remote | |||||||||
Charger mode specification | ||||||||||
Output voltage | Dependent on battery type | |||||||||
Charge current | 0-85A MAX | 35A MAX | 45A MAX | 50A MAX | ||||||
Battery initial voltage for start up | 0-15.7v for 12v(*2 for 24v;*4 for 48v;*8 for 96v) | |||||||||
Over charge protection shutdown | 15.7v for 12v(*2 for 24v;*4 for 48v;*8 for 96v) | |||||||||
Charger curves(4stage constant curren) | battery types | |||||||||
4 step digital controlled progressive charge | ||||||||||
Battery type | Fast V Fast V(*2 for 24v;*4 for 48v) | |||||||||
Gel U.S.A | 14.0 13.7 | |||||||||
A.G.M. 1 | 14.1 13.4 | |||||||||
A.G.M. 2 | 14.6 13.7 | |||||||||
Sealed lead acid | 14.4 13.6 | |||||||||
Gel euro | 14.4 13.8 | |||||||||
Open lead acid | 14.8 13.3 | |||||||||
Calcium | 15.1 13.6 | |||||||||
De-sulphation | 15.5 for 4 hrs | |||||||||
Remote control/RS232/USB | Yes. Optional |